Coil spring compressor 230mm | 370mm

SKU: K 152

In stock

 35.00 69.00 + VAT
Coil spring compressor Coil spring compressor by Kamasa tools. With 1/2″ drive and outside 21 mm hex socket for socket
Select options This product has multiple variants. The options may be chosen on the product page

3 Arm Cylinder Hone 3”

SKU: WT04B4043

In stock

 16.00 + VAT
3 Arm Cylinder Hone 3” 3 Arm Cylinder Hone 3” suitable for use on engines and brake cylinder. Removes deposits

Valve Grinding Sticks with Paste

SKU: LT-6229

In stock

 22.00 + VAT
Valve Grinding Sticks with Paste Valve Grinding Sticks with Paste by Kamasa tools. A pair of valve lappers with 4

Overhead Valve Spring Compressor

SKU: HY-20

In stock

 19.00 + VAT
  • For use on a wide range of OHV, OHC And CHV engines
  • Allows valve springs and valve stem oil seals to be replaced with the cylinder head
  • Durable steel construction

Exhaust Puller Tool Kit

SKU: WT04A2086

In stock

 6.50 + VAT
Exhaust Puller Tool Kit Exhaust Puller Tool Kit allows easy fitting of exhaust mounts. Invaluable when installing exhaust systems. Two T-handled

FUEL FILTER KEY

SKU: WT04A3032

In stock

 6.00 + VAT
Fuel Filter Key Fuel Filter Key for removing and refitting fuel filter cap when replacing the fuel cartridge. Used to

Radiator And Cap Pressure Test 

SKU: WT04A4078

In stock

 119.00 + VAT
Radiator And Cap Pressure Test Radiator And Cap Pressure Test by Toolwarehouse. For pressure testing radiators of most popular vehicles.

16pcs Air Caliper Wing Tool

SKU: WT04B4009

In stock

 68.99 + VAT
16pcs Air Caliper Wing Tool 16pcs Air Caliper Wing Tool by Toolwarehouse. The kit comes complete with 16 pads and

Seal puller

SKU: K10651

In stock

 18.00 + VAT
Seal puller Seal puller by Kamasa Tools. The tool makes removing seals so much easier. Two hook sizes and a

19 Piece Hub & Bearing Puller

SKU: WD31-1021D

In stock

 95.00 + VAT
19 Piece Hub & Bearing Puller 19 Piece Hub & Bearing Puller for the removal and installation of front hub bearings.

Press and Pull Sleeve Kit

SKU: WT04B2031

In stock

 195.00 + VAT
Press and Pull Sleeve Kit Press and Pull Sleeve Kit by Toolwarehouse. This precision tool kit is for extracting and drawing

3 Arm Cylinder Hone 1-1/8”

SKU: WT04B4042

In stock

 9.00 + VAT
3 Arm Cylinder Hone 1-1/8” 3 Arm Cylinder Hone 1-1/8” suitable for use on engines and brake cylinder. Removes deposits

Oxygen Sensor Set

SKU: WT04A2098

In stock

 52.00 + VAT
Oxygen Sensor Set Oxygen Sensor Set for removal of oxygen sensors, injectors, oil pressure sending units and vacuum switches. Heat-treated

WISHBONE EXTRACTOR TOOL

SKU: WT04B2023

In stock

 69.00 + VAT
Size 1170mm Length. Move the sliding groove to adjust the position to make removing easier. Use lever to push down

Clutch alingnment tool

SKU: WTO4A3002

In stock

 19.00 + VAT
  • For easy alignment and installation on the workbench.
  • Suitable for front wheel drive vehicles.
  • Supplied with 3 different sized expanding collets.
  • Sizes: Small cone: 15mm Medium cone: 19mm Large cone: 24mm

Piston Ring Compressor Set

SKU: WTB1874

In stock

 29.00 + VAT
Piston Ring Compressor Set Piston Ring Compressor Set by Toolwarehouse.  Bottom identification of cylinder markings for easy installation. Included: self‐adjusting

Cylinder Leak Detector

SKU: WT04A1020D

In stock

 59.00 + VAT
Cylinder Leak Detector Cylinder Leak Detector is designed to detect a variety of common engine faults such as worn piston

Flow Meter and Adaptor Set

SKU: WT04A3024D

In stock

 69.00 + VAT
  • For use on up to 6 Injectors.
  • Measures the amount of fuel the injectors return to the deposit tank.
  • It can identify damaged or clogged injectors quickly and easily
  • Direct measurement of return flow of the injector, using external flow meter.
  • 24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.

230V HHO Engine Carbon Cleaner

SKU: CC230V

Available on backorder

 6,850.00 + VAT

Master Fuel Injection Pressure Tester

SKU: WT04A3017

In stock

 95.00 + VAT
Master Fuel Injection Pressure Tester Master Fuel Injection Pressure Tester by Toolwarehouse. This set tests all fuel injection systems, both

Steering Rack Knuckle Tool

SKU: VS4000

In stock

 49.00 + VAT
Steering Rack Knuckle Tool Steering Rack Knuckle Tool by Sealey tools. A smooth, powerful tool for removing and fitting inner

3pcs Jointed Glow Plug Socket

SKU: WT01Y0305-1

In stock

 19.00 + VAT
3pcs Jointed Glow Plug Socket 3pcs Jointed Glow Plug Socket suitable for removing the hard to reach glow plugs. Double

Valve Spring Remover/Installer

SKU: WT04A2079

In stock

 79.00 + VAT
Valve Spring Remover/Installer Valve Spring Remover/Installer by Toolwarehouse. Used with the cylinder head still on the engine and in the

Crankshaft oil seal tool BMW

SKU: WT04A1036D

In stock

 75.00 + VAT
Crankshaft front and rear oil seal tool BMW Crankshaft front and rear oil seal tool BMW by Toolwarehouse. Used for

Turbo Pressure Gauge

SKU: WT04A3069D

In stock

 39.00 + VAT
  • Suitable for all vehicles
  • Supplied with nut and 2M PU table
  • -1a+3Bar

Crankshaft Harmonic Balance Holder BMW

SKU: WT04A4041

In stock

 39.00 + VAT
Holds vibration damper when loosening and tightening center crankshaft bolt.

Combustion Gas Leak Tester Kit

SKU: WT04A4052

In stock

 49.00 + VAT
Combustion Gas Leak Tester Kit Combustion gas leak tester kit by Toolwarehouse. Set for testing leaks in head gasket without

Valve Collect Installing & Pick Up Tool

SKU: WT04A2081

In stock

 14.00 + VAT
Valve Collect Installing & Pick Up Tool Valve Collect Installing & Pick Up Tool holds the valve keepers in its

Valve spring compressor, universal

SKU: K 216

In stock

 69.00 + VAT
Valve spring compressor, universal Valve spring compressor, universal by Kamasa Tools. Universal valve spring compressor for most engines. Width mm

65mm Hub Nut Socket

SKU: WT01E0596

In stock

 15.00 + VAT
65mm Hub Nut Socket 65mm Hub Nut Socket by Toolwarehouse. Forged from chrome vanadium steel hardened, tempered, chrome-plated and polished

Audi/VW 7 speed DSG clutch tool

SKU: WT04B1042

In stock

 89.00 + VAT
Audi/VW 7 speed DSG clutch tool Audi/VW 7 speed DSG clutch tool by Toolwarehouse. Installs and removes the clutch of

Professional Coil Spring Compressor

SKU: WT04B2005

In stock

 179.00 + VAT
Professional Coil Spring Compressor Professional Coil Spring Compressor by Toolwarehouse. Universally suitable for vehicles with MacPherson struts and semi-struts. Ideal

Macpherson Spring Compressor Tool Set

SKU: WT04B2001B

In stock

 189.00 + VAT
Macpherson Spring Compressor Tool Set Macpherson Spring Compressor Tool Set, compresses all styles of MacPherson front and rear coil springs.

Brake Pressure Test Kit

SKU: WT04B4055D

In stock

 95.00 + VAT

Auxiliary Stretch Belt Removal Tool

SKU: WT04A2177D

In stock

 49.00 + VAT
Removal and installation of elasticated or stretch drive belts

VW Diesel Crankshaft Sealing Flange

In stock

 79.00 + VAT
  • Specially designed tool to renew crankshaft sealing flange.
  • Applicable : For 16V, 20V, 1.9, 2.0 diesel engine since 2006.
  • Golf, TOURAN, and Audi A3 4-cyl. Diesel engine 4-valve for fitting sealing flange with integrated sender wheel.

HALDEX FILTER SERVICE

In stock

 15.00 + VAT
Haldex Filter Service Haldex Filter Service for removing and refitting different filters for a number of vehicles Remove the fluid

Fuel Tank Spanner

SKU: WT04B1030

In stock

 15.00 + VAT
Fuel Tank Spanner Fuel Tank sender spanner by toolwarehouse. All-purpose spanner, adjustable: 75-160mm For removing and tightening the plastic ring

Battery & Alternator Tester with LCD Screen 12V

SKU: AK500

In stock

 35.00 + VAT
Battery & Alternator Tester with LCD Screen 12V Battery & Alternator Tester with LCD Screen 12V by Sealey. Display verifies

Trim pad remover set 4 pcs

SKU: K 280

In stock

 39.00 + VAT
Trim pad remover set 4 pcs Trim pad remover set 4 pcs by Kamasa. Used to remove covers, trim, clips

Inner Tie Rod Tool

SKU: WT04B3028

In stock

 52.00 + VAT
Inner Tie Rod Tool Inner Tie Rod Tool by Toolwarehouse. This set makes it easy to remove and re-install inner

VW/AUDI BELT PULLEY HOLDER

SKU: WT04A4040

In stock

 17.00 + VAT
VW/AUDI BELT PULLEY HOLDER VW/Audi Belt pulley holder by Toolwarehouse. The pulley holder mainly for crankshaft toothed belt sprocket when

Guide Pulley Wrench

SKU: 2015061

In stock

 7.00 + VAT
Guide Pulley Wrench Guide Pulley Wrench for use on the guide pulley on K4M and some K4J 1.4/1.6 engines Applications:

BMW Rear Axles Bush Remover/Installer

SKU: WT04B2092D

In stock

 115.00 + VAT
BMW Rear Axles Bush Remover/Installer BMW Rear Axles Bush Remover/Installer E36, E46 Removal and replacement tool for metallic bushes on

Injector Seat and Manhole Cleaning

SKU: WT04A3045D

In stock

 89.00 + VAT
  • Cleaning of injector ports and seating

VW Petrol Crankshaft Sealing Flange

SKU: WT04A1026

In stock

 89.00 + VAT
Crankshaft Seal Flange Remover and Installer is suitable for Volkswagen and Audi Group for 16v 1.4, 1.6 engines fitted to Volkswagen, Audi, Skoda and Fiat.